List of Publications:

Citation URL: http://scholar.google.com.my/citations?user=5I0wNmAAAAAJ&hl=en

 

 

A.  Papers in International Journals

 

1. Nader Barsoum, Myjessie Songkin., "Stability of Sabah Grid System", Transactions on Engineering and Computer Science, Gnoscience Group, Vol. 1, (2), 113, 2020, PP. 1-13

 

2. Nader Barsoum, Farah Talib, "Energy Saving Analysis and Simulation for Home Electricity", Journal of Power and Energy Engineering, Scientific Research Publishing, Vol.8 No.9, ISSN: 2327-5901, doi: 10.4236/jpee.2020.89004, 2020, pp. 35-50

 

3. Nader Barsoum, "Simulation of HVDC Cable Transmission to an AC Optimum Signal", Global Journal of Technology and Optimization, 11(1), ISSN: 2229-8711, doi 10.4172/2020.11.246, 2020, PP. 1-4

 

4. Abd Rahim Bin Mohamed Kifli and Nader Barsoum. “Pre-Protection of Home Appliances from Overpower Using Mobile Phone”. ACTA Scientific, Computer Sciences Vol.2. Issue.2 (2020): pp. 01-05.

 

5. Nader Barsoum, Peridiana Kisam, "Simulation of Power Converter for HVDC Transmission", Global Journal of Technology and Optimization, 10(1), ISSN: 2229-8711, doi 10.4172/2229-8711.1000232, 2019, pp.7-11

 

6. Nader Barsoum, Saidatul Atiqah Binti Azmi., "Sımulation of Solar Pump and Hydro Generation Standalone Power Supply", Global Journal of Technology and Optimization, 10(1), 2019, ISSN: 2229-8711, doi: 10.4172/2229-8711.1000231, 2019, pp.1-6

 

7. Nader Barsoum, Karen Lee, “Simulation of Overcurrent Relay in 33kV Power Grid Protection”, Open Science Journal of Electrical and Electronic Engineering, 2018; Vol. 5, No. 5, ISSN: 2381-4470, pp. 54-63

 

8. Nader Barsoum, Nadira Zulkeffley, Myjessie Songkin, “Transient Stability Simulation of 33 kV Power Grid”, Energy and Power Engineering Journal, Scientific Research Publishing, Vol.10 No.6, ISSN: 1947-3818,  2018, pp. 301-318

 

9. Kiu Han Teck, Nader Barsoum, "Steady State Simulation of 33 kV Power Grid”, Journal of Power and Energy Engineering, Scientific Research Publishing, Vol.6 No.6, ISSN: 2327-5901,  2018, pp. 106-124

 

10.  Nader barsoum, Christoper Bin Asok, David Ting Szu Kwong, Clifford Gan Thien Kit, "Effect of Distributed Generators on Stability in a limited bus Power Grid System", Journal of Power and Energy Engineering, Scientific Research Publishing, Vol: 5, Issue 9, ISSN: 2327-5901, 2017, pp. 74-91

 

11.  Nader barsoum, Christoper Bin Asok, David Ting Szu Kwong, Clifford Gan Thien Kit, "Power Analysis for a Limited Bus Grid System with Distribution Generators", Global Journal of Technology and Optimization, OMICS online, Vol. 8, Issue 2, ISSN: 2229-8711, doi: 10.4172/2229-8711.1000216, 2017, pp. 1-10

 

12.  Lim Ying Kiat, Nader Barsoum, "Smart Home Meter Measurement and Appliance Control", International Journal of Innovative Research & Development, Vol.6, Issue.7, ISSN 2278 0211, 2017, pp. 64-70

 

13.  Nader barsoum, "Eigenvalue Loci of Small Signal Stability in Induction Motor", International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, ISSN: 2278 – 8875, Vol: 6, Issue 4, 2017

 

14.  Muhammad Muktadir Rahman, Nader N. Barsoum, "An Adjustable HVDC Power Supply using Integrated High Voltage Transformer with Some Protective & Controlling Features", International Journal of Energy Applications and Technologies IJEST, Vol. 3, Issue 1, 2016, pp. 1 – 6

 

15 . Nader Barsoum, Rinoe Nizam, Elvin Gerard, “New Approach On Development A Dual Axis Solar Tracking Prototype”, Wireless Engineering and Technology, Scientific Research Journal, Vol. 7, No. 1, ISSN: 2152-2308, doi.org/10.4236/wet.2016.71001, 2016, pp. 1-11

 

16. Nader Barsoum, “Development of Light Control and Motor Speed Control by Smart Phone”, Global Journal of Technology and Optimization GJTO, Vol. 6, Issue 3, ISSN: 2229-8711, doi:10.4172/2229-8711.1000186, September 2015, pp. 1-8

 

17.  Nader Barsoum, Adrian Peter, “GSM Greenhouse Monitoring and Control of Temperature and Soil Moisture”, European International Journal of Science & Technology, ISSN 2304-9693, Vol. 4, No. 6, August 2015, pp. 1-10

 

18. Nader Barsoum, Pearl Dianne Petrus, “Cost Optimization of Hybrid Solar, Micro-Hydro and Hydrogen Fuel Cell Using Homer Software”, Journal of Energy and Power Engineering EPE, scientific research on power, Vol. 7, No. 8, DOI: 10.4236/epe.2015.78031, ISSN Online: 1947-3818, August 2015, pp. 337-347

 

19. Nader Barsoum, Glenn Isaiah Stanley, “Design of High Voltage Low Power Supply Device”, Universal Journal of Electrical and Electronic Engineering, Horizon Research Publishing, USA, November 2014, ISSN: 2332-3280, Vol. 3, No. 1, DOI: 10.13189/ujeee.2015.030102, pp. 6-12

 

20. Nader Barsoum, Izam Faizan Bin Moidi, “DC Motor Speed Control Using SMS Application”, Journal of Intelligent Control and Automation,  November 2014, Vol.5, No.4, Scientific Research Publishing, ISSN: 2153-0661, DOI: 10.4236/ica.2014.54022, pp. 205-212

 

21. N. N. Barsoum:, “Time Domain Transfer Function of the Induction Motor”, Journal of Studies in Engineering and Technology, Vol. 1, No. 2; August 2014, ISSN 2330-2038, E-ISSN 2330-2046, doi:10.11114/set.v1i2393,  Redfame Publishing, pp. 1-9.

 

22. Chin Pin Rui, Nader Nassif Barsoum, Arthur Wong Kok Ming, Wong Kiing Ing, “Modelling of Impedance Matching Circuit with Digital Capacitor in Narrowband Power Line Communication”, Journal of Energy and Power Engineering 8 (2014), David Publishing, USA, pp. 201-207

 

23.  Nader Barsoum, Chai Zen Lee, “Simulation of Power Flow and Protection of a Limited Bus Grid System with Injected Solar Power”, Journal of Energy and Power Engineering EPE, scientific research on optimization, Vol.5, No.1, DOI: 10.4236/epe.2013.51008, ISSN Online: 1947-3818,  January 2013, pp. 59-69

 

24.  Nader Barsoum, Lyndy Wong Sze Lin, "Implementation of a Small Size Electronic Power Module for Motor Control", Global Journal of Technology and Optimization GJTO, Vol. 3, June 2012, ISSN 2229-8711 online publication, pp. 65-71

 

25.  N. Barsoum, “Performance of Direct Torque Control Implemented in Speed Drive”, Global Journal of Technology and Optimization GJTO, Vol. 3, June 2012, ISSN 2229-8711 online publication, pp. 59-64

 

26. Nader Barsoum, Pin R. Chin, "Internet Control Drive Project using LabView via PLC", Journal of Intelligent Control and Automation,  November 2011, Vol.2, No.4, Scientific Research Publishing, ISSN: 2153-0661

 

27. Nader Barsoum, “Fabrication of Dual-Axis Solar Tracking Controller Project”, Intelligent Control and Automation, Scientific research Journal, doi:10.4236/ica.2011.22007, Vol.2, No.1, pp. 57-68

 

28.  Nader Barsoum, “Implementation of Dual-Axis Solar Tracking Pilot Project”, Global Journal of Technology and Optimization GJTO, Vol. 2, June 2011, ISSN 2229-8711, online publication, pp. 49-56

 

29.   Pandian Vasant and Nader Barsoum,: “Hybrid Pattern Search and Simulated Annealing for Fuzzy Production Planning Problems”, Journal of Computers and Mathematics with Applications Elsevier, Vol. 2, no.2, CA, USA, May 2010, ISSN: 1942-0730 and online 1942-0749, pp. 38-44

 

30.  Pandian Vasant, Nader Barsoum & Jeffrey Webb: “The Optimization of A Revenue Unction in a Fuzzy Linear Programming Model Used for Industrial Production Planning”, Journal of applied Computers science methods ACSM, Vol.1, No.2, Lodz, Poland, June 2010, ISSN: 1689-9636, pp. 65-83

 

31. Cho Zin Myint, Nader Barsoum, and Wong Kiing Ing,: "Design a Medical Device for Blood Oxygen Concentration and Heart Beat Rate", Global Journal of Technology and Optimization GJTO, Vol. 1, June 2010, ISSN 1985-9406, online publication, pp. 66-71; and special issue in international journal of Biomechatronics and Biomedical robotics; Inderscience July issue, Vol.3, 2011. ISSN (Online) 1757-6806 (Print) 1757-6792

 

32.  Nader Barsoum  and Pandian Vasant,: "Simplified Solar Tracking Prototype", Global Journal of Technology and Optimization GJTO, Vol. 1, June 2010, ISSN 1985-9406, online publication, pp. 38-45

 

33. Nader Barsoum: "Speed Control of the Induction Drive by Temperature and Light Sensors via PIC", Global Journal of Technology and Optimization GJTO, Vol. 1, June 2010, ISSN 1985-9406, online publication, pp. 53-59 

 

34.  Nader Barsoum: “Implementation of a Higher Quality DC Power Converter”, Journal of Electromagnetic Analysis and Application (JEMAA), China, Jan. 2010, Vol.2, No.2, ISSN: 1942-0749, Online publication

 

35. Pandian Vasant & Nader Barsoum,: “Hybrid genetic algorithms and line search method for industrial production planning with non-linear fitness function”, Engineering Applications of Artificial Intelligence, Journal of Elsevier, May 2009, Vol.22 online, pp. 767-777

 

36.  Barsoum, N. N.: "Modeling and Cost Effective Simulation of Stand alone Biomass and Micro-hydro Energy”, Global Journal of Engineering and Technology, Calcutta, July 2008, Vol.1, No.2, India, pp. 161-168

 

37. Pandian Vasant & Nader Barsoum,: “Possibilistic Optimization in Planning Decision of Construction Industry. International Journal of Production Economics, Elsevier, June 2008, Vol.111, ISSN: 0925-5273, pp 664-675

 

38. Pandian, V & Barsoum, N. N.: “Decision Making in Toc-Product-Mix Selection Via Fuzzy Cost Function Optimization”, Journal of Elsevier science IJPE, Nov-2006, ISBN-13: 978-0-08-045406-1

 

39. Pandian, V & Barsoum, N. N.: 'Fuzzy optimization of unit products in mix-product selection problem using fuzzy linear programming approach', soft computing Journal, Vol.10, No.2, Jan 2006, pp.144-151 and enformatika transaction Journal, Vol. 9, Nov. 2005, IEC Istanbul, Turkey, ISBN 975-98458-8-1, ISSN 1305-5313

 

40. Barsoum, N.N. & Harris, M.R.: “Theorems of torque coefficients on stability for induction and reluctance machines”, International Journal of electrical engineering education IJEEE, Manchester institute of science and technology UMIST, UK, Vol.38, No.3,(7), 2001, pp.260-275

 

41. Barsoum, N.N. & Hui, L.L.: “Generation of geometric models by line sketches”, Alexandria Engineering Journal  AEJ, Egypt, Vol.38, No.4 (D), July 1999, pp.67-75  

 

42. Barsoum, N.N.: “Hybrid interpolation with tangential and curvature continuity”, Alexandria Engineering Journal AEJ, Egypt, Vol.38, No.3 (D), May 1999, pp.39-45

 

43. Barsoum, N.N.: “Characteristics and properties of small signal electrical machine stability”, Journal of institution of engineers, Calcutta, India, Vol.79, August 1998, pp.66-71

 

44. Barsoum, N.N. & El-Kobrosy, G.A.: “Observations and simulation of a large signal mechanical vibrating system”, Journal of computer methods in applied mechanics and engineering, Elsevier science, Germany, Vol.135 (Dynamics), No.1-2, August 1996, pp.1-13

 

45. Barsoum, N. N.: 'Analysis and computation of a large signal mechanical vibrating system', JIE (Journal of the Institute of Engineers), Mechanical Division, Calcutta, India, April 1993, (11), Vol. 74, pp.93-98

 

46.  El-Kobrosy, G. & Barsoum, N. N.: ‘On Vector/matrix differential equations in vibrating systems’, Alexandria Engineering Journal AEJ, Egypt, Vol.32, No.4, (D), (10), Feb-1993, pp. 147-155

 

47.  Barsoum, N. N.: 'Forward and backward waves in reluctance synchronous machine', Alexandria Engineering Journal AEJ, Egypt, Vol.30, No.3, (B), (7), 1991, pp.57-69

 

48. Barsoum, N. N.: 'Equivalent circuits and torque components in true variables for the induction motor', Alexandria Engineering Journal AEJ, Egypt, Vol.30, No.1, (B), (1), 1991, pp.13-28

 

49. Barsoum, N. N.: 'An Introduction to a new physical operator, k-operator', Alexandria Engineering Journal AEJ, Egypt, Vol. 29, (D), No.2, (4), 1990, pp.5-9

 

50. Mikhail, S. E. & Barsoum, N. N.: 'Detailed representation of synchronous generator and distributed turbine masses', Alexandria Engineering Journal AEJ, Egypt, Vol. 20, 1980, (7), pp.34-42

 

 B. Papers in International Conferences

 

51. Alvin Teo Tuan Lee,  Hoe Tung Yew,  Mazlina Mamat, Nader N Barsoum, Pungut Ibrahim: “Installation of the High Resistance Grounding System on the Ungrounded System at Offshore Platform”, 2021 IEEE 19th Student Conference on Research and Development (SCOReD), Nov. 23-25, 2021, Kota Kinabalu, Malaysia

 

52. Jamal Ahmad Dargham, Nader Barsoum, Renee Chin Ka Yin, Ali Chekima:, “Software Development of a Smart Irrigation System”,  First International Conference on Emerging Electrical Energy, Electronics and Computing Technologies 2019 (ICE4CT 2019), Melaka, Malaysia, October 29 - 31, 2019

 

53. Teo Tuan Lee, Alvin, Barsoum, N.N, "Offshore oil and gas platform transient over-voltages from ground fault on ungrounded system", First International Conference on Emerging Electrical Energy, Electronics and Computing Technologies (ICE4CT 2019), Malacca, Malaysia, October 29-31, 2019

 

54. Myjessie Songkin, N. N. Barsoum, Farrah Wong, "Impact Assessment of Large-Scale Solar Photovoltaic integration on Sabah Grid System",  Sixth International Conference on Computational Science and Technology (ICCST2019), Kota Kinabalu, Sabah, Malaysia, August 29-30, 2019

 

55. Myjessie Songkin, N. N. Barsoum, Farrah Wong, P. Y. Lim, "A study on Sabah Grid System Stability", IEEE International Conference on Automatic Control and Intelligent Systems, Kota Kinabalu, Sabah, Malaysia, October 21, 2017

 

56. Kiing Ing Wong, Nader Barsoum, Pin Rui Chin, "Modelling of LCRC Adaptive Impedance Matching Circuit in Narrowband Power Line Communication", Proc. of the 11th International Conference on Power Electronics and Drive Systems (PEDS), Sydney, Australia, June 9-11, 2015

 

57. Nader Barsoum, Glenn Isaiah Stanley, “Design of High Voltage Low Power Supply Device”, Proc. of Seoul international conference on applied science and engineering (SICASE),  ISBN 978-986-89536-5-9, Seoul, Korea, August 29-31, 2014, pp. 321-332

 

58.  Nader N. Barsoum, Muhammad Muktadir Rahman, “An Adjustable HVDC Power Supply using Integrated High Voltage Transformer with Some Protective & Controlling Features”, Proc. of International Conference on Advanced Technology & Sciences (ICAT’14), Istanbul, Turkey, August 12-15, 2014, pp. 43-46

 

59. N. N. Barsoum:, “Time Domain Transfer Function of the Induction Motor”, CD Proceeding of power control and optimization PCO13 conference, ISBN 978-983-44483-63, Prague, Czech Republic 25-26 August, 2013

 

60. Chin Pin Rui, Nader Nassif Barsoum, Arthur Wong Kok Ming, Wong Kiing Ing, “Adaptive Impedance Matching Network with Digital Capacitor in Narrowband Power Line Communication”, IEEE International Symposium on Industrial Electronics, May 28-31, 2013, Taipe, Taiwan

 

61. Cho Zin Myint, Nader Barsoum, Wong Kiing Ing, “Design A Wireless Sensor Device With Zigbee For Measuring Blood Oxygen Concentration And Heart Beat Rate”, CUTSE conference, 6-7 November, Miri, 2012

 

62.   Nader Barsoum, ‘Scalar control on speed drive for ac motor’, Proceeding of power control and optimization PCO12 conference, ISBN 978-983-44483-56, AIP, Vol 1499, ISBN 978-0-7354-1113-5, Las Vegas 6-8 August, 2012, pp. 169-174

 

63.  Nader Barsoum, ‘Sequential control by speed drive for ac motor’, Proc. of power control and optimization PCO12 conference, ISBN 978-983-44483-56, AIP, Vol 1499, ISBN 978-0-7354-1113-5, Las Vegas 6-8 August, 2012, pp. 175-181

 

64. Lue Ik Hong, Wong Kiing Ing, Nader Barsoum, “Workload Prediction of Wireless Sensor Network based on Linear Prediction”, CD Proc. IEEE International Conference on Cyber Technology in Automation, Control and Intelligent Systems, ISBN: 978-14673-14190, May 27-29, 2012, Bangkok, Thailand, pp. 160-164

 

65. Nader Barsoum & Adrian Daniel, “Fabrication and installation of dual-axis solar tracking controller”, CD Proc. of global conference on power control and optimization PCO11, ISBN 978-983-44483-32, Dubai, 1-3 June 2011, UAE

 

66.  Nader Barsoum, “Intelligent time Control of Power system Protection relays”, CD Proc. of global conference on power control and optimization PCO11, ISBN 978-983-44483-32, Dubai, 1-3 June 2011, UAE

 

67. Nader Barsoum, “Network Planning Distribution By Particle Swarm Optimization”, CD Proc. of global conference on power control and optimization PCO10, ISBN 978-983-44483-32, Kuching 2-4 Dec. 2010,. Malaysia

 

68. Nader Barsoum, “Application on Programming the PIC Controller for a Sensitive Motor Speed”, Proc. International conference on Computer Design (CDES'10), July 12-15, 2010, Las Vegas, USA, pp. 26-32

 

69. Kiing-Ing Wong, Nader Barsoum, Cho Zin Myint,: “Teaching the Electronic Design and Embedded System Course with Body Sensor Nodes”, 2nd International conference on education technology and computer, Shanghai, China, 22-24 June 2010, ISBN: 978-1-4244-6368-8. pp. 158-162

 

70. Nader Barsoum,: “Temperature and Light Control of Three phase Induction Motor Speed Drive by PIC”, CD Proc. of global conference power control and optimization PCO10, ISBN 978-983-44483-18, Gold Coast 2-4 Feb. 2010,. Australia, and AIP, Vol. 1239, ISBN 978-0-7354-0785-5, Melville, New York, 2010, pp. 185-191

 

71. Pandian Vasant & Nader Barsoum,: “Hybrid General Pattern Search and Simulated Annealing For Industrial Production Planning Problems”, CD Proc. of global conference power control and optimization PCO10, ISBN 978-983-44483-18, Gold Coast 2-4 Feb. 2010, Australia, and AIP, Vol. 1239, ISBN 978-0-7354-0785-5, Melville, New York, 2010, pp. 271-277

 

72. Z. X. Cheong & N.N. Barsoum,: “Implementation of Energy Saving Controller for Electromagnetic Ballast Fluorescent lamps”, CD Proc. of global conference of power control and optimization PCO10, ISBN 978-983-44483-18, Gold Coast 2-4 Feb. 2010, Australia, and AIP, Vol. 1239, ISBN 978-0-7354-0785-5, Melville, New York, 2010, pp. 164-174

 

73. Nader Barsoum & Pandian Vasant,: “Design of a Traditional Solar Tracking System”, CD Proc. of global conference power control and optimization PCO10, ISBN 978-983-44483-18, Gold Coast 2-4 Feb. 2010, Australia, and AIP, Vol. 1239, ISBN 978-0-7354-0785-5, Melville, New York, 2010, pp. 151-159

 

74. Cho Zin Myint, Nader Barsoum, and Wong Kiing Ing,: "Design of wearable Device for Blood Oxygen Concentration and Heart Beat Rate", CD Proc. of global conference power control and optimization PCO10, ISBN 978-983-44483-18, Gold Coast 2-4 Feb. 2010, Australia, and AIP, Vol. 1239, ISBN 978-0-7354-0785-5, Melville, New York, 2010, pp. 213-222

 

75. Nader Barsoum,: “Implementation of a Prototype for a Conventional Solar Tracking System”, Proc. of European Symposium on Computer Modeling and Simulation proceeding, EDAS Symposium Modelling and Simulation EMS09, Athens 25-27 Nov. 2009, Greece, ISBN: 978-0-7695-3996-0, pp. 23-30

 

76. Z. X. Cheong & N.N. Barsoum,: “An Investigation on the Energy Saving Potential of Electromagnetic Ballast Fluorescent Lamps”, CD Proc. global conference of power control and optimization PCO09, ISBN 978-983-44483-3, Bali 1-3 June, 2009, Indonesia, and AIP, Vol. 1159, ISBN 978-0-7354-0696-4, Melville, New York, 2009, pp. 155-162

 

77. Pandian Vasant & Nader Barsoum,: “Hybrid Simulated Annealing and Genetic Algorithms for Industrial Production Management Problems”, CD Proc. of power control and optimization PCO09 conference, ISBN 978-983-44483-3, Bali 1-3 June, 2009, Indonesia, and AIP, Vol. 1159, ISBN 978-0-7354-0696-4, Melville, New York, 2009, pp. 254-261

 

78. Barsoum, N. N, Pandian, V, Sabira K., Zulkifly Abbas,: “Solving Non-Linear Optimization Problems with Adaptive Genetic Algorithms Approach”, CD Proc. of PSACO-2008 conference, Bali 3-5/12, Indonesia

 

79. Cheong Z. X &Barsoum N.N.: ”Implementation of temperature sequential controller on variable speed drive”, AIP Proceeding of power control and optimization PCO08 conference, Vol.1052, ISBN 978-0-7354-0581-3, Chiangmai 18-20 July, 2008, Thailand, pp.151-158

 

80. Pandian, V, Barsoum, N. N: ”Compromise Linear Programming with Fuzzy  Function Coefficients Methodology and Application to Product-Mix Problem and Sensitivity Measurement”, AIP Proceeding of power control and optimization PCO08 conference, Vol.1052, ISBN 978-0-7354-0581-3, Chiang Mai 18-20 July, 2008, Thailand, pp.278-285

 

81. Sim, E. Y., and. Barsoum, N:”Cost-effective Simulation of the Hybrid Solar/Wind and Diesel Energy System in Rural Area”, AIP Proceeding of power control and optimization PCO08 conference, Vol.1052, ISBN 978-0-7354-0581-3, Chiang Mai 18-20 July, 2008, Thailand, pp. 68-73

 

82. Barsoum, N.N, Wong, Y.Y, Ling, T.K., Goh, W.C,: “Modelling and Simulation and Cost of Stand-lone Solar and Biomass Energy”, CD Proceeding of Asia Modelling Symposium AMS2008, Kuala Lumpur 13-15 May 2008, Malaysia

 

83. Barsoum, N.N., Yong, H.H., Chang, H.M.A., Goh W.C.,: “Modelling and Cost Effective Simulation of Stand-Alone Solar and Micro-Hydro Energy”, CD Proceeding of PSACO 2008 conference, Vishakhapatnam 13-15 March 2008, India. pp. 809-814

 

84. Vasant, P., Hrishikesh S. K., Barsoum, N.N.,: “Determining Optimal Composition of Tempeh Ingredients by Fuzzy Linear Programming Using Robust Non-Linear Membership Function’, Proceeding, on CD, of Curtin University of Technology, Sarawak conference CUTSE 07, Miri, Malaysia, 26-27 November 2007

 

85. Vasant, P., Barsoum, N.N., Watada, J.: ‘Evolutionary Computational Approach for Solving Production Planning Problem’, Proceeding of International conference on Soft Computing and Human Sciences, BMFSA, Fukuoka 2-5 August 2007, Japan

 

86. Barsoum, N.N. & Hwo, T.K.: “Design and Implementation of PLC Controller for Induction Motor”, CD Proceeding of Control, Instrumentation & Mechatronics conference CIM'07, Johor Bahru 28-30 May 2007, Malaysia. Pp.328-332

 

87. Vasant, P., Barsoum, N.N.,: “Fuzzy Optimization under Uncertainty: A Case Study”, CD Proceeding of Control, Instrumentation & Mechatronics conference CIM'07, Johor Bahru 28-30 May 2007, Malaysia.pp.428-433

 

88. Barsoum, N.N. & Janng, W.K.: “Programming of pic Micro-controller for Power Factor Correction”, CD Proceeding of Asia Modelling symposium AMS2007, Phuket 27-30 March 2007, Thailand. pp. 14-18

 

89. Barsoum N.N. & Goh, W.C.: ‘Modelling the feasibility of an integrated hydrogen hybrid energy system for stand alone power system’, CD Proceeding of Australian universities in power and energy conference AUPEC 06, Victoria, Melbourne 10-13 December 2006, Australia.

 

90. Goh, W.C. & Barsoum N.N.: ‘Balancing cost operation and performance in integration hydrogen hybrid energy system’, CD Proceeding of Australian universities in power and energy conference AUPEC 06, Victoria, Melbourne 10-13 December 2006, Australia.

 

91. Barsoum, N.N. & Png, F.,: ‘High quality ac power with TRIAC inverter’, CD Proceeding of Australian universities in power and energy conference AUPEC 06, Victoria, Melbourne 10-13 December 2006, Australia.

 

92. Vasant, P., Barsoum, N.N., Bhattacharya, A.: “Solving Complex Industrial Production Planning System Problem with Multi-dimensional Constrained Non-linear Optimisation Approach”, Proceeding, on CD, of Curtin University of Technology, Sarawak Conference CUTSE 06, Miri, Malaysia, 27-28 November 2006.

 

93. Barsoum, N.N. & Wong, S.K.: ‘Implementation of an active converter for high quality dc power performance’, Proceeding of international conference on electric machines ICEM2006, in CD, Chania 2-5 September 2006, Greece

 

94. Barsoum, N.N. & Yii, M.L.: “Implementation of higher quality dc power converter”, Proceeding of the 5th international conference on power electronics and motion control, IPEMC, Shanghai, 13-16 August 2006, China, IEEE

 

95. Barsoum, N. N., Bhattacharya, A. & Vasant, P.: ”Soft Computing of Degree of Fuzziness in MCDM Model Using Flexible MF”, Proc. of International conference on Computational Intelligence and Security 15 – 19 December 2005, Xi’an, China

 

96. Bhattacharya, A., Vasant, P., Barsoum, N.N. & Dimirovski, G.: “An intelligent possibilistic linear programming (IPLP) approach for measuring performance variables under manufacturing environment”, International conference on Intelligent Systems (ICIS), Kuala Lumpur, Malaysia, December 1-3, 2005.

 

97. Pandian, V, A. Bhattacharya, A. & Barsoum, N. N.: "Fuzzy Patterns in Multi-level of Satisfaction for MCDM Model Using Modified Smooth S-Curve MF", International Conference FSKD, Changsha, China, August 27-29, 2005, Lecture Notes in Computer Science, Springer-link Part II-1294, Vol.3614, ISBN: 3-540-28331-5

 

98. Pandian, V & Barsoum, N. N.: 'Optimisation of Fuzzy cost function in product mix selection problem", 16th IFAC World ccongress 2005, Prague, July 3-8, 2005, DVD-5108, Check Republic CZ,

 

99. Pandian Vacant, Barsoum N.N.: 'Possibolistic Optimisation in Forecasting and Planning of Construction Industry', Proceeding of 8th international conference on mechatronics technology ICMT, Hanoi 8-12 November 2004, Vietnam, pp.477-482

 

100. Barsoum, N.N & Pui, C.: "Sensor-less and direct torque control for poly-phase induction motor", Proceeding of the 4th international conference on power electronics and motion control, IPEMC, Xi'an 14-16 August 2004, China, pp.393-397

 

101. Barsoum, N.N.: “Observation on the perturbation frequency and dominant eigenvalue in dynamic machine equation”, Proceeding of international conference on communications, computer and power ICCCP, Muscat 12-14 February 2001, Oman, pp.46-51

 

102. Barsoum, N.N.: “Artificial neuron controller for DC drive”, Proceeding of international meeting of the institution of electric and electronic engineering IEEE, Singapore 23-27 January 2000, pp.692-698

 

103. Barsoum, N.N.: “Theorems of torque coefficients for induction and reluctance machines”, Proceeding on CD of international power/energy conference, Monash/Gippsland, Victoria 30/11-3/12 1999, Australia, No.115, pp.1-7

 

104. Barsoum, N.N. “Features of quasi-resonance converter for self excited induction generator”, Proceeding of international conference on communications, computer and power ICCCP’98, Muscat 7-10 December 1998, Oman, pp.53-56

 

105. Barsoum, N.N., Harris, M.R. & Petrie, C.J.S.: “Small signal flow analysis of electric machines”, Proceeding of international conference on electric machines ICEM’98, Istanbul 2-4 September 1998, Turkey, Vol.2, pp.770-775

 

106. Barsoum, N.N. & Harris, M.R.: “Root locus and inherent stability in electric machines”, Proc. of international conference on electric machines ICEM’98, Istanbul 2-4 September 1998, Turkey, Vol.2, pp.776-781

 

107. Barsoum, N.N.: “Neuro-fuzzy control to variable reluctance drive systems”, Proceeding of international symposium on power electronics, quality, electrical drives, advanced machines SPEEDAM, Sorrento 3-5 June 1998, Italy, pp.37-41

 

108. Barsoum, N.N.: “Sliding mode control of variable reluctance machine”, Proceeding of international  symposium on power electronics, quality, electrical drives, advanced machines SPEEDAM, Sorrento 3-5 June 1998, Italy, pp.67-71

 

109. Barsoum, N.N & Nagrial, M.: “Small signal stability of reluctance synchronous machines”, Proceeding of Australian universities in power and energy conference AUPEC’97, NSW, Sydney 29/9-1/10 1997, Australia, Vol.1, pp.205-210

 

110. Barsoum, N.N. & Valentino, S.: “An overall view on remote circuit for poly-phase motor control”, Proceeding of international conference on robotic, vision and parallel processor in industrial automation ROVPIA’96, Ipoh 28-30 November 1996, Malaysia, Vol. 2, pp.708-715

 

111. Barsoum, N.N. & Rahman, Z.: “On line variable parameters identification of electric machines”, Proceeding of 3rd east/west congress on engineering education, Gdynia 15-20 September 1996, Poland, pp.89-92

 

112. Sew, K & Barsoum, N.N: “Software design for induction motor characteristics (IMC package)”, Proceeding of international conference on control’95, Melbourne 23-25 October 1995, Australia, Vol.1, pp.199-204

 

113. Harris, M. R. &  Barsoum, N. N.: 'Alternative f/b equivalent circuits for the induction motor and relation to synchronising and damping torque coefficients', Proceeding of international conference on electric machines ICEM-94, Paris 5-8 September 1994, France, Vol.1, pp.294-299

 

114. Barsoum, N. N. & Kingeston Sew: 'Simulation of polodes condition for generating geometrical curves' Presented in the international conference on computer aided geometric design CAGD, Penang July 4-8 July 1994, USM, Malaysia.

 

115. Barsoum, N. N.: 'Equivalent circuits and torque components in 2-axis reference frames for induction motor control', Proceeding of international conference on robotic, vision and parallel processor in industrial automation ROVPIA-94, Ipoh 26-28 May 1994, Malaysia, pp.676-683

 

116. Barsoum, N. N: ‘Torque perturbation in vector space for induction motor control’, Proceeding of international conference on robotic, vision and parallel processor in industrial automation ROVPIA-94, Ipoh 26-28 May 1994, Malaysia, pp.684-692

 

117. Barsoum, N. N.: 'Vibration in turbine/generator system under control', Proceeding of international symposium on hydro-synchronous generators ISSM, Wuhan 11-13 October 1993, China, pp.286-29

 

118. Harris, M. R. & Barsoum, N. N.: 'Stability of induction motor: a further look at equivalent circuit approaches', Proceeding of international conference on electric machines ICEM-92, Manchester UMIST 15-17 September 1992, England UK, Vol.2, pp.567-571

 

119. Barsoum, N. N.: 'Direct and simplified analysis for synchronous machine stability', Proceeding of international conference on evolution and modern aspects of synchronous machines SM'100, Zurich 27-29 August 1991,Switzerland, Vol. 3, pp.979-984

 

120. Harris, M. R. & Barsoum, N. N.: 'Synchronising and damping torque coefficients in electric machines and their relations to stability' Proceeding of international conference on electric machines ICEM 90, MIT 12-15 August 1990, Cambridge, USA, Vol.1, pp.48-53

 

C. Books

 

121. Nader Barsoum, Glenn Isaiah Stanley: “Implementation of Low Power High Voltage Supply Device”, Book chapter in “New Approaches in Engineering Research Vol. 10”, Tamil Nadu, India.2021, (8), pp. 53-64

 

122. Myjessie Songkin, N. N. Barsoum, Farrah Wong, "Impact Assessment of Large-Scale Solar Photovoltaic integration on Sabah Grid System",  Book chapter in “Computational Science and Technology", Lecture notes in Electrical Engineering, Springer link, ISSN 1876-1119, ISBN 978-981-15-0058-9, doi.org/10.1007/978-981-15-0058-9, Volume 603, 2020, pp. 659-668

 

123. Pandian Vasant, Gerhard-Wilhelm Weber, Nader Barsoum, Vo Ngoc Dieu, "Power, Control and Optimization. Scientific World Journal. (pnyt.)"., Edition Vol.2015. Hindawi Publishing Corporation

 

124. Ivan Zelinka, Pandian Vasant, Nadar Barsoum, "Power, Control and Optimization",  Lecture Notes in Electrical Engineering, Springer link, Volume 239, 2013, ISBN: 978-3-319-00205-7 (Print) 978-3-319-00206-4 (Online) http://link.springer.com/book/10.1007/978-3-319-00206-4/page/1)

 

125. Pandian Vasant, Nadar Barsoum, Jeffrey Webb: "Innovation in Power, Control, and Optimization: Emerging Energy Technologies", Information Science Reference, IGI Global, USA 2012, ISBN13: 9781613501382, ISBN10: 1613501382, DOI: 10.4018/978-1-61350-138-2, URL: http://www.igi-global.com/gateway/book/52721

 

126. Pandian, V. & Barsoum, N. N,: “Application of Fuzzy Optimization in Forecasting and Planning of Construction Industry”, Book chapter in “Artificial Intelligence for Advanced Problem Solving Techniques”, Information Science Reference, IGI Global, USA 2008, URL: http://www.igi-global.com/gateway/chapter/5326

 

127. N. N. Barsoum, “Electric machines and drive systems” book, 1997, Library edition and online publication

 

128. N. N. Barsoum, “Modern Mathematics for Engineers" book, 1994, Library edition and online publication

 

129. N. N. Barsoum, et al: AIP Proceedings 2008, 2009, 2010

 

130. N. N. Barsoum, et al: AIP Proceedings 2011, 2012